Perfect for large installations in business and educational environments
The Optoma EH500 Full HD produces crystal clear, bright images, perfect for a broad range of applications including technical, advertising media and medical training where detail really matters. The Optoma EH500 has a full support for Crestron Roomview, Telnet, Extron IP Link, AMX dynamic device discovery and PJ-Link protocols, allow almost all aspects of the EH500 to be controlled across a network, keeping you in control, wherever you are. The environmentally friendly Optoma EH500 has energy saving features including <0.5W standby mode and auto power off saving you both time and money. Our unique Optoma Colour guarantee ensures hassle-free, long-lasting projection. This is perfect for large installations in business and educational environments and ideal for use in large screen applications where fine image detail is required.
Creston Roomview® - Network control
The RoomView® software provides a custom configurable interface to monitor, manage and control every device in every room remotely from any computer
- Manage up to 250 projectors at the same time (via master PC).
- Control and alter the projector settings using a simple web browser page including OSD menu control.
- Set up email alerts for warning message
- Ideal for large installations in both the educational and business environments.
The Optoma EH500 Full HD (1920 x 1080) has more than twice the resolution of HD Ready (1280 x 720). EH500 is compatible with HDTV broadcasts and high–definition media to project impressive full 1080p images and video in their original digital brilliance.
The extensive RS232 command set makes it simple and easy to control the EH500 with any control system.
AMX Compatibility – Dynamic Discovery IP protocol is incorporated into the EH500. This feature allows for easy installation with AMX control systems
This native 1080p projector accepts a wide variety of computer and video input signals. Connectivity includes: HDMI, DVI-D, dual VGA (SCART/ Component via adaptor), S-Video, Composite, VGA-Out, RS232 , RJ45 and +12V trigger. Two audio inputs for individual PC and video connections enable the EH500 to function as an audio switcher and volume controller, thereby eliminating complicated and costly additional audio hardware and cabling.
Clear, focused images
The DarkChip3™ technology from Texas Instruments produces a stunning 10.000:1 contrast ratio for pin sharp graphics and crystal clear text. Crisper whites, ultra-rich blacks makes images come alive and text easier to read
- Ideal for business and education presentation.
The Optoma EH500 incorporates energy saving features to conserve power and extend the lamp life:
To achieve the maximum 3500hrs² lamp life time the projector should be operating in STD mode and the shut down timer should be enabled to automatically switch off the projector if it is accidentally left on when no longer required. Enabling the <0.5W Standby mode will ensure the minimum energy consumption when the projector is not being used.
Virtually maintenance free = lower cost of ownership
The Optoma EH500 provides lower cost of ownership, longer life and improved reliability. The filter-free projector design does not require regular filter cleaning or filter replacement, saving you time and money.
The EH500 incorporates BrilliantColor™ technology to produce stunningly bright images with perfectly balanced life-like colors.
Using the inherent speed of DLP® technology, Optoma Full 3D projectors can output video and images at an astonishing rate of 120Hz, allowing you to show full screen, full color, stereoscopic 3D. The 3D effect is generated by splitting this signal into two standard video streams, one for each eye. Using DLP® Link™ technology, the 3D glasses synchronize with the image on screen to filter each stream to the correct eye. Your brain then combines the two streams to make them jump into life.
The EH500 supports multiple 3D formats from various devices such as PC, Blu-ray 3D™, Sony® PS3, Microsoft® Xbox 360 or 3D TV broadcast system.
The Optoma EH500 has a PJ-Link compatibility.
System integration control
Multiple EH500 can be monitored over LAN and can also provide the user with an email message alert in case an error occurs or a lamp fails or needs to be replaced using Crestron Roomview. The web browser interface and full support for Telnet, Extron’s IP Link, AMX dynamic device discovery and PJ-Link protocols, allow almost all aspects of the EH500 to be controlled across a network, keeping you in control, wherever you are.
- Global monitoring of all AV devices
- Track projector lamp life
- Email alerts and instant notifications- help desk requests, service reminders, device failure or theft
- Event Scheduling
Exceptional connectivity / multiple terminals
Easy to use remote control